Our homes are made to protect us from our environment. What happens when our home fails to protect us? Indoor air pollution can be as much as 10 to 100 times more polluted than outdoor air. It can cause a wide range of health problems. Mold, mildew, fungi, bacteria, viruses, microorganisms, chemical fumes, organic odors, dust pollen and other floating particles arc problems in many households.
How can we remove these problems from our homes and kill the mold, mildew, fungi, bacteria, viruses and microorganisms before they can affect us’? Most people think that if they filter the air that they are removing the problem. Filters will not remove all of the particles from the air, not even a High-Efficiency Particulate Air filter (HEPA) will do this. HEPA filters will remove particles down to 3 microns or larger. That means that dust particles smaller than that will just pass through it. Filters can also become breeding grounds for mold and bacteria. A filter collects, it does not KILL!
For a filter to work, the air must pass through it. If the air has to pass by you before it goes through the filter, what good was the filter? You still breathed in the particles. If a filter collects mold spores, it does not get rid of the problem. The mold that created the spores is still living and generating mold spores. A filter cannot go to the source and stop it.
Ultraviolet lights (UV) are claimed to kill 99.9% of all organisms. In fact they only kill what passes by the light, and not all (UV) kills 99.9% of all organisms.
Some UV lights are made to produce Ozone. The amount of Ozone produced is in such small quantities, .01 ppm. (Parts per million), and will not have any major effect on indoor air quality. LIV lights also have a few problems. Certain UV light has the ability to burn the Retina of the eyes when you look directly at it. UV lights burn out or quit creating the frequency of UV that produces Ozone after 10 to 12 months and have to be replaced. Now you know why UV systems only offer a 1 -year warranty on their units. This is always a yearly expense.
Most Ozone producing equipment creates, as a by-product, Oxides of’ Nitrogen (NOx). Oxides of Nitrogen create Nitrous and Nitric Acids when they combine with water vapor or moisture. Nitric Acid is used to etch metals. In the upper atmosphere, when it combines with water vapor, it comes down as Acid Rain. If you breathe NOx it can combine with the moisture in your nose, throat and lungs and create Nitrous and Nitric Acid there. This is toxic and can destroy healthy tissue. With the output of these machines they cannot go to the source and stop it. Ultraviolet lights (UV) are claimed to kill 99.9% of all organisms. In fact they only kill what passes by the light, and not all UV kills 99.9% of all organisms.
Some UV lights are made to produce Ozone. The amount of Ozone produced is in such small quantities, .01 ppm. (Parts per million), and will not have any major effect on indoor air quality. UV lights also have a few problems. Certain UV light has the ability to burn the Retina of the eyes when you look directly at it. UV lights burn out or quit creating the frequency of UV that produces Ozone after 10 to 12 months and have to be replaced. Now you know why UV systems only offer a 1 -year warranty on their units. This is always a yearly expense.
Most Ozone producing equipment creates, as a by-product, Oxides of Nitrogen (NOx). Oxides of Nitrogen create Nitrous and Nitric Acids when they combine with water vapor or moisture. Nitric Acid is used to etch metals. In the upper atmosphere, when it combines with water vapor, it comes down as Acid Rain. If you breathe NOx it can combine with the moisture in your nose, throat and lungs and create Nitrous and Nitric Acid there. This is toxic and can destroy healthy tissue. With the output of these machines they cannot go to the source and stop it.
Negative Ion Generators (NG’S) can remove particles from the air. They broadcast a frequency that will give particles in the air a negative charge. Since the Earth has a positive charge it attracts negatively charged particles. This process will get the particles out of the air and drop them to surfaces. NG’S have a few problems.
Typically NG’S will create a black spot on the wall directly behind the unit where particles from the air have been attracted to it. This is difficult to clean. They do not kill mold, mildew, fungi, bacteria, viruses and microorganisms. It just drops them to surfaces. An NG’S cannot go to the source and stop it.
Collection Plates (CP’S) can remove particles from the air. As air passes by the collection plates the positively charged particles are attracted to the negative collection plate. The Ionic Breeze by Sharper image uses this method. They advertise silent operation by using the air currents to pass air through their machine. This method has many serious problems.
Since they are silent, that means no fan! The rate at which the (CP’S) remove particles from the air is SO slow, Consumer Reports October issue 2003 (page 27) tells their readers to avoid the Ionic Breeze. Just because a coffee table collects dust it does not make the coffee table an air cleaner. “There are much better choices.” Particles are just collected on the plates. They will not kill mold, mildew, fungi, bacteria, viruses or microorganisms. Instead it can become a breeding ground for what you were trying to get rid of. The mold that created the spores that were collected is still living and generating mold spores. CP’S cannot go to the source and stop it.
Hot Corona Discharge can create Ozone. Ozone can be an effective way to purify the air when in sufficient quantities. Companies that use this method are restricted from creating the quantities needed to adequately and safely remove pollution problems. The amount of Ozone produced is .01 ppm. (Parts per million). This is due to that fact that this method inherently creates Oxides of Nitrogen as a by-product. This amount will not have any major effect on indoor air quality. As the level of Ozone production increases so does the production of Oxides of Nitrogen. To me it doesn’t make sense to exchange one type of pollutant for another potentially more dangerous one. There has to be a better method. Ecoquest, Alpine Air and Living Air, which are all divisions of Alpine, use this method.
Most Ozone producing equipment creates, as a by-product, Oxides of Nitrogen (NOx). Oxides of Nitrogen create Nitrous and Nitric Acids when they combine with water vapor. In the upper atmosphere it comes down as Acid Rain. They use Nitric Acid to etch metals. If you breathe NOx it can combine with the moisture in your lungs and create Nitrous and Nitric Acid in your lungs. This is toxic and can destroy healthy tissue. With the outputs of these types of machines they cannot go to the source and stop it.
The ARANIZERTM is quite a bit different from other technologies. We take ambient air that is air in the atmosphere, and pass it over our patented AranTM generator. The AranTM generator creates a high energy low heat plasma field where it bombards Oxygen molecules with electrons. This process selectively separates the Oxygen molecules while leaving the Nitrogen molecule intact. Oxygen atoms have the natural ability to absorb more electrons than what they need. With this greater level of energy the Oxygen atoms are able to recombine into higher allotropes of Oxygen like 04,05,06,07, 08, 09,010, OX which we termed as AranTM and is our Trademark for all molecules greater than ozone. The extra energized Oxygen atoms are what give the AranTM molecules its very high oxidative properties.
How does AranTM work outside of the machine’? Let us say that an 010 molecule is created by our machine. When that 010 molecule encounters a pollutant, one of the 0 atoms is released to oxidize the pollutant. The 010 molecule drops down to a 09 molecule. The pollutant is oxidized, given a negative charge, from the extra electrons, and drops out of the air. If that 09 molecule encounters another pollutant the process repeats itself and drops to an O8 molecule. If that 08 molecule just so happens to hump into a normal 02 molecule it can grab the 02 molecule and jump hack up to an 010 molecule. This is known as the cascading effect. Mold, mildew, fungi, bacteria, viruses and microorganisms oxidized by the AranTM molecule are killed, given a negative charge and removed from the air.
A few advantages of our process are the fact that the Nitrogen molecule (N2), that makes up 72% of the atmosphere, remains intact. This is important because, if we do not separate the Nitrogen molecule, we will not produce Oxides of Nitrogen (NOx). Oxides of Nitrogen create Nitrous and Nitric Acids when they combine with water vapor. In the upper atmosphere it comes down as Acid Rain. If you breathe NOx it can combine with the moisture in your lungs and create Nitrous and Nitric Acid in your lungs. This is toxic and can destroy healthy tissue.
Since AranTM uses oxidation as a means to purify the air and destroy mold, mildew, viruses, bacteria and microorganisms the only by-product other than the dead organisms is Oxygen. Oxidation is a chemical reaction where Oxygen is combining with another substance. In any chemical reaction there are 2 things that can speed up the chemical reaction. One is heat and the other is energy. The extra electrons give AranTM the heat and energy needed to speed up the process of oxidation. This allows AranTM to he able to oxidize substances that other technologies couldn’t even touch.
Copyright
Indoor Air Purification © 2005 TN Trikilis
All Rights Reserved